Bearded Dragon Heating and UVB Starter Kit with five included components

Bearded Dragon Heating & UVB Starter Kit

$169.99
$169.99 $179.99
Skip to product information
Bearded Dragon Heating and UVB Starter Kit with five included components
1/8
  • Bearded Dragon Heating and UVB Starter Kit with five included components
  • Starter kit contents with basking bulb clamp lamp T5 UVB fixture and thermometers
  • Heat UVB and temperature monitoring system for bearded dragon habitat
  • Bearded dragon warm UVB and cool zone habitat setup diagram
  • Adjustable ceramic socket reptile clamp lamp with timer and dimmer
  • 24W T5 HO UVB 10.0 tube with aluminum reflector fixture
  • Two digital probe thermometers for warm and cool enclosure sides
  • Bearded dragon starter kit setup and safety notes
Bearded Dragon Heating & UVB Starter Kit

Bearded Dragon Heating & UVB Starter Kit

$169.99
$169.99 $179.99

At a Glance

Best for
Beginner bearded dragon habitat setup
Main function
Heat, UVB lighting, and temperature monitoring
Included pieces
5 core components
Plug type
US plug
Thermostat included
No. This kit includes manual dimming and temperature monitoring, not automatic thermostat control.
Enclosure included
No

What this kit does not include

This starter kit does not include the enclosure, substrate, hides, basking platform, food dish, water dish, décor, supplements, infrared temperature gun, automatic thermostat, or live animal. It is designed to support the heat, UVB lighting, and temperature monitoring part of a beginner bearded dragon habitat setup.

Starter kit overview

A practical heating, linear UVB and temperature-monitoring system for building a better bearded dragon habitat.

Setting up heating and UVB is one of the most important and often most confusing parts of preparing a bearded dragon habitat. This coordinated starter kit combines the essential equipment needed to create a daytime basking area, provide broad linear UVB coverage and monitor temperatures at both ends of the enclosure.

  • 75W daytime basking heat
  • 24W T5 HO UVB 10.0
  • Wide linear UVB coverage
  • Timer and manual dimming
  • Two temperature probes
  • US plug configuration

Why Buy This as a Kit?

Setting up a bearded dragon habitat can be confusing for beginners because heat, UVB lighting, fixture placement, and temperature monitoring all need to work together. This starter kit groups the core setup components into one system, helping new keepers avoid the guesswork of buying separate parts one by one.

Less Guesswork

Core heat, UVB, and monitoring components are grouped together for a simpler starting point.

Better Setup Flow

The kit is organized around a warm basking side, UVB coverage, and warm-to-cool temperature monitoring.

Beginner Guidance

Setup notes help new keepers understand placement, testing, and daily monitoring.

Add Starter Kit to Cart

Common Beginner Setup Mistakes This Kit Helps Address

  • Using a heat lamp without monitoring both warm and cool sides
  • Choosing UVB lighting without considering fixture placement and coverage
  • Creating heat without a clear warm-to-cool temperature gradient
  • Assuming the habitat is ready without testing temperatures first
  • Forgetting that brightness alone does not confirm effective UVB exposure

This kit does not replace species-specific husbandry research, but it gives beginners a more organized starting point for heat, UVB, and temperature monitoring.

What You Get in One Kit

Basking heat source

Creates focused daytime warmth for the basking side.

Adjustable lamp holder

Helps position the heat bulb over the selected basking area.

Linear UVB tube

Supports broad UVB coverage across part of the enclosure.

Reflector fixture

Holds the UVB tube and directs light toward the setup area.

Dual-side temperature monitoring

Helps check warm-side and cool-side temperatures independently.

What's included

75W White Basking Heat Bulb

Qty 1

Creates a focused daytime heat source for the basking side of the enclosure.

75W / E27 base / White or natural warm-white daytime light

Adjustable Ceramic-Socket Clamp Lamp

Qty 1

Securely holds and positions the basking bulb while allowing the lighting angle and heat output to be adjusted.

E27 ceramic socket / 360° gooseneck / US plug / Timer and manual dimmer

24W T5 HO UVB 10.0 Tube

Qty 1

Provides broad linear UVB coverage across part of the enclosure.

24W / UVB 10.0 / Linear T5 HO tube

Aluminum T5 Reflector Fixture

Qty 1

Holds the T5 HO UVB tube and directs more light toward the enclosure through its polished internal reflector.

57.5 × 6.8 × 5.8 cm / 110V / US plug

Digital Probe Thermometers

Qty 2

Monitor the warm and cool sides of the enclosure at the same time.

−50°C to 70°C · °C / °F · 100 cm probe cable

How the kit works together

  1. Heat

    The basking bulb and adjustable lamp create a focused warm zone.

  2. UVB

    The T5 HO system provides broad UVB coverage across the basking side.

  3. Monitor

    Two probe thermometers help confirm a warm-to-cool temperature gradient.

Who this kit is for

Good fit for

  • First-time bearded dragon owners
  • New habitat setups
  • Existing enclosures that need a coordinated lighting upgrade
  • Keepers replacing compact UVB lighting
  • Owners who want to monitor both warm-side and cool-side temperatures

May not be right for

  • A complete terrarium or enclosure package
  • Automatic thermostat-controlled heating
  • A replacement for species-specific husbandry research
  • A guarantee that one fixed installation suits every enclosure

Setup guide

Use the equipment together to create a warm basking side, a cooler retreat side and broad UVB coverage across part of the enclosure. Always test the completed setup before regular use.

  1. Step 1

    Create the Basking Side

    Install the 75W basking bulb and adjustable clamp lamp over one end of the enclosure. Direct the light toward a stable basking surface while keeping the opposite side cooler.

    Secure the clamp and arm firmly before switching on the lamp. The reptile must not be able to touch the bulb, socket or hot metal housing.

  2. Step 2

    Position the T5 UVB Fixture

    Install the T5 fixture so that it covers the basking area and part of the enclosure rather than the entire habitat. It may be placed above a suitable mesh screen, mounted underneath compatible mesh, or secured to a wooden vivarium.

    Mesh density, mounting height and distance affect UVB delivery. Always provide a shaded retreat.

  3. Step 3

    Monitor Both Sides

    Place one digital probe on the warm side and the second on the cool side. Secure the wires and suction cups so they cannot be pulled, bitten or placed against hot equipment.

    The thermometers measure temperature but do not automatically regulate the lamp.

  4. Step 4

    Test and Adjust the Setup

    Allow the enclosure temperatures to stabilize, then review both thermometer readings. Adjust the lamp height, angle, manual dimmer setting, basking-surface position and ventilation as needed.

    Do not assume the correct environment has been created simply because the equipment is installed. Test before regular use and recheck after seasonal room-temperature changes.

  5. Step 5

    Set a Consistent Daytime Schedule

    Use the timer control to establish a regular daytime lighting period. The basking lamp and UVB system should normally be turned off during the nighttime period.

    Do not use colored night bulbs. Separate nighttime heating should only be considered when room temperatures genuinely require it.
Add Starter Kit to Cart

Important setup notes

The correct setup depends on enclosure size, room temperature, ventilation, mesh density, lamp distance, basking-platform height and fixture placement. The included dimmer is manually controlled and the thermometers display temperature only. An infrared temperature gun is also recommended for basking-surface checks.

Component details

75W White Basking Heat Bulb

• Power: 75W
• Base: E27
• Light color: White or natural warm white
• Intended use: Daytime basking heat
• Positioning: Install at one end of the enclosure to support a warm-to-cool temperature gradient

Heat output varies with enclosure size, room temperature, ventilation, lamp distance and basking-surface height. Always measure and adjust the setup before regular use.

Adjustable Ceramic-Socket Clamp Lamp

• Color: Black
• Size: 4.2 x 6 x 35 cm
• Socket: Heat-resistant ceramic E27 lamp holder
• Housing: Metal
• Arm: Flexible 360° adjustable gooseneck
• Mounting: Clip-on or hanging
• Cord length: 1.8 m
• Plug configuration: US plug
• Control: Timer and manual dimmer
• Compatible included bulb: 75W basking bulb

The timer and dimmer provide scheduling and manual output adjustment. They are not an automatic thermostat.

24W T5 HO UVB 10.0 Tube

• Lighting type: T5 HO linear UVB
• UVB rating: UVB 10.0
• Power: 24W
• Intended use: Desert-reptile daytime UVB lighting
• Matching fixture length: 57.5 cm

Effective UVB exposure depends on fixture placement, distance, reflector position, mesh obstruction and enclosure layout. Always preserve a shaded retreat area.

Aluminum T5 Reflector Fixture

• Overall size: 57.5 × 6.8 × 5.8 cm
• Voltage: 110V
• Material: Aluminum
• Reflector: Polished internal reflector
• Plug configuration: US plug
• Installation options: place on a suitable terrarium top, mount beneath a compatible mesh screen, or attach to a wooden vivarium
• Mounting hardware: Included

Remove the blue protective film from the reflector before first use. Install securely and keep the reptile from contacting the tube, fixture or wiring.

Digital Probe Thermometers

• Quantity: 2
• Display size: 58 × 37 mm
• Temperature range: −50°C to 70°C
• Units: Celsius and Fahrenheit
• Probe cable length: 100 cm
• Probe type: Water-resistant wired probe
• Mounting: Suction cup
• Suction cup diameter: 25 mm
• Battery type: 1.5V button-cell battery

Place one probe on the warm side and one on the cool side. These devices display temperature only and do not control the heat source. Keep the display units dry.

What else you'll need

These items are not included in the kit.

  • Appropriate bearded dragon enclosure
  • Stable basking platform
  • Hides and shaded retreat
  • Suitable substrate
  • Feeding and hydration supplies
  • Infrared temperature gun
  • Automatic dimming thermostat if desired
  • Species-appropriate diet and supplements

Safety and care

Safety summary

Secure all fixtures before use, keep bulbs and wiring away from direct animal contact, protect electrical equipment from water and test temperatures before placing the animal into the enclosure.

Safety details

• Use only with compatible voltage, plugs and fittings.
• Keep bulbs and hot fixtures out of direct contact with the reptile.
• Keep electrical components away from water, misting systems and excessive moisture.
• Do not use damaged bulbs, sockets, cords, plugs or switches.
• Allow equipment to cool fully before handling or adjustment.
• Do not cover the lamps or block ventilation.
• Keep combustible decor away from the heat source.
• The manual dimmer does not replace an automatic thermostat.
• Visible brightness alone cannot confirm effective UVB exposure.
• Recheck the setup after changing bulbs, fixtures, enclosure layout or room conditions.

Care instructions

Inspect the basking bulb, socket, cords and fixtures regularly for cracks, flickering, loose connections, discoloration or unusual heat. Remove the blue protective film from the T5 reflector before first use. Unplug equipment before cleaning. Keep thermometer display units dry and replace the button-cell batteries when the displays become dim or unstable.

Still setting up your first bearded dragon habitat? These answers can help clarify common beginner questions before you buy.

FAQ

Is this a complete bearded dragon habitat kit?

No. This kit provides core heating, linear UVB lighting and temperature-monitoring equipment. It does not include an enclosure, basking platform, hides, substrate, feeding supplies or decor.

Does the kit include both bulbs and fixtures?

Yes. It includes one 75W basking bulb with an adjustable ceramic-socket clamp lamp, plus one 24W T5 HO UVB 10.0 tube with its aluminum reflector fixture.

Is the included dimmer an automatic thermostat?

No. The included control provides timer and manual dimming functions. It does not automatically detect or regulate enclosure temperature.

Why are two thermometers included?

One thermometer can monitor the warm side while the other monitors the cool side, making it easier to confirm that a usable temperature gradient has been created.

Does this kit include an infrared temperature gun?

No. An infrared temperature gun is recommended for quick basking-surface checks, but it is not included in this kit.

Can the T5 fixture be placed above a mesh screen?

Yes, it can be placed above a compatible mesh screen. However, mesh can reduce UVB transmission, so installation distance and enclosure layout must be evaluated carefully.

Does UVB 10.0 work at every distance?

No. Effective UVB exposure depends on the tube, reflector, mounting height, mesh obstruction and enclosure design. Always provide both an illuminated basking zone and a shaded retreat.

Can this kit be used for other reptiles?

Possibly, but heating and UVB requirements vary significantly by species. Confirm that the equipment and installation are appropriate before using it for another reptile.

Add Starter Kit to Cart

Related guides

You may also like